To Plot Screen Contents - Agilent Technologies 35670A Quick Start Manual

Saving and Plotting Data

To plot screen contents

1
Set up your plotter.
2
Press [ ] [
Local/GPIB
SYSTEM CONTROLLR
3
Press [ ][
Plot/Print
PLO T/PRNT DEVI CE
Press [ ].
Rtn
4
Press [
PLOT/PRNT DESTINATN
Press the [
OUTPUT TO GPIB
(see "To setup you plotter—GPIB."
or
Press [
OUTPUT TO SERIAL
(see "To setup you plotter —RS-232-C."
or
Press [
OUTPUT TO PARALLEL
or
Press [
OUTPUT TO FILE
(see "To select the default disk").
5
Press [ ].
Rtn
6
Press [ ] [
Plot/Print
START PLOT/PRNT
The analyzer is only able to initiate plotting if the plotter is connected to the
appropriate port and if the analyzer is designated as the system controller. All of the
contents of the screen, except the softkey labels, are plotted when you complete
this task.
To print the contents of the screen, press [
Step 3. Be sure a printer is connected to the appropriate interface port.
54
].
] [
HP-GL PLOTTER
].
] if your plotter is connected to the GPIB
] if your plotter is connected to the RS-232-C
] if your plotter is connected to the parallel port.
] to plot the contents of the screen to a file
].
PLOT/PRNT DEVICE
Agilent 35670A Quick Start Guide
].
] [
RASTER PRINTER
] in