To Measure A Value Relative To A Reference - Agilent Technologies 35670A Quick Start Manual

The Basics

To measure a value relative to a reference

1
To stop a measurement, press [
2
Press [
3
Using the knob, move the main marker to the reference position.
4
Press [
5
Using the knob, move the relative marker to the point of interest.
6
Read the Xr and Yr values which are relative to the main marker's reference position.
The [
main marker's current marker position. The marker reference appears as a small
square. The marker readouts, Xr and Yr at the top of the grid, are relative to this
position.
The relative marker let you easily determine the peak-to-peak value of a spectrum. It
can also be used to measure the holdoff time for a tachometer signal.
Relative Marker
readout area
Marker Reference
12
], [
Marker
REFERENCE SETUP
REFERENCE TO MARKER
REFERENCE TO MARKER
Agilent 35670A Quick Start Guide
].
Pause-Cont
].
].
] key turns on the relative marker and zeroes it at the
Marker Reference
values
Relative Marker