Table of Contents
Advertisement
6
Connect the Fibre Channel data cable(s).
a
Connect a cable from the first host (Node A) first HBA FC port to the
"H0" connector on the right Host I/O card.
b
Connect another cable from the first host (Node A) second HBA FC port
to the "H0" connector on the left Host I/O card.
c
Connect another cable from the second host (Node B) first HBA FC port
to the "H1" connector on the left Host I/O card.
d
Connect another cable from the second host (Node B) second HBA FC
port to the "H1" connector on the left Host I/O card.
NexStor 4921F/4922F/4941F/4942F
Connect to Ethernet Switch or Hub (LAN)
10/100 Base-T Cable (embedded StorView)
Connect to Ethernet Switch or Hub (LAN)
10/100 Base-T Cable (embedded StorView)
Host Server: Node A
Host Server: Node B
Multi-Port Mirrored Dual Host-Quad Connection Cabling Diagram
7
(Embedded StorView only) Connect a CAT 5e ethernet cable from the RAID
Controller network port to your ethernet switch or LAN. Connect a second
CAT 5e ethernet cable from the second RAID Controller to another network
connection.
Chapter 3 - Setup and Installation
H0
D1
D2
FC HBA
FC HBA
FC HBA
FC HBA
Multi-Port Mirrored Dual Host-Quad Connection Configuration
H1
H1
H0
TEST
NETWORK
ONLY
SERVICE
TEST
NETWORK
ONLY
SERVICE
r
r
85
Advertisement
Table of Contents
