Table of Contents
Advertisement
3
(AC Power Supplies Only) In.stall the power cord(s) and secure them using
the power cord bale
NOTE:
For DC Power Supplies, skip to "Cabling the DC Power Supplies" on
page 54.
a
Ensure that the orientation is such that when the power cord is inserted,
the bale will be on top of the cord, and will fit over and onto the cord.
b
Connect the other end of the power cord into a three-hole grounded
outlet or UPS power system. A UPS is highly recommended.
c
Repeat steps 3(a) and 3(b) for the other power cord.
Installing Transceivers
Bale fits over
and onto the
power cord.
Attaching the Power Cord Bales
Chapter 3 - Setup and Installation
Completing the Installation
53
Advertisement
Table of Contents
