NexStor 4900F Series User Manual page 72

Chapter 3 - Setup and Installation
Locate your selected operating mode and complete the setup. You will be
instructed at the appropriate time to set the switches as described previously.
NOTE:
"Simplex Mode (NexStor 4911F/4912F/4931F/4932F)" on page 59.
"Duplex Mode (NexStor 4921F/4922F/4941F/4942F)" on page 73
58
SES Controller Card Switch Setting Overview
If you are installing either a NexStor 4931F/4932F or a NexStor
4941F/4942F be sure to connect the ethernet cable from the controller to
your network adapter or network hub connection, refer to "Network
Connectivity for Embedded StorView" on page 55.
"Stand-Alone Dual Port Single Host Configuration" on page 59.
"Stand-Alone Dual Port Single Host Dual Connection Configuration" on page 63.
"Stand-Alone Dual Port Dual Host Single Connection Configuration" on page 66
"Stand-Alone Dual Port Dual Host Dual Connection Configuration" on page 69.
"Multi-Port Mirrored Single Host-Single Connection Configuration" on page 74.
"Multi-Port Mirrored Single Host-Dual Connection Configuration" on page 77.
"Multi-Port Mirrored Dual Host-Single Connection Configuration" on page 80.
"Multi-Port Mirrored Dual Host-Quad Connection Configuration" on page 83.
"Multi-Port Mirrored SAN Attach-Single Switch Configuration" on page 87.
"Multi-Port Mirrored SAN Attach-Dual Switch Configuration" on page 91.