Table of Contents
Advertisement
Chapter 4 - Managing and Monitoring
Audible Alarm
An audible alarm will sound when any of the enclosure's component condition
changes to an abnormal state. To silence the alarm, press the Alarm Reset button
located on the front bezel. The corresponding LED will remain illuminated until
the condition returns to a normal state.
LED Matrix
The RAID Controllers have control of the Drive Status and Drive Activity LEDs.
These LEDs on the front bezel present information about the drives and their
activity by illuminating with different colors and states (steady and flashing), as
well as a corresponding audible alarm.
Refer to the table below for a description of the LED conditions and their meaning:
106
Audible Alarm
Front Bezel LED & Audible Alarm Matrix
Condition
Power Up
Simplex Mode Controller Soft
Boot/Reset
Indicates Faults
Indicates I/O Activity
LitePipes
Drive Carrier LitePipes
Drive Status LED
Channel Status LED
Steady Green for
Blinking Green until
inserted drives.
the controllers are
ready.
Steady Green for
Steady Green.
inserted drives.
Audible Alarm
Short Beep.
Short Beep.
Advertisement
Table of Contents
