Table of Contents
Advertisement
From the send screen you can monitor the progress of the download. You
can safely stop the transfer without affecting your existing firmware any time
during the transfer until it has been completed. The upload does not
overwrite the firmware during the upload process, it writes the new code into
RAM until completed, then copies the new firmware code to the EEPROM
after verification.
If you elect to stop a download in progress, ensure that the stop (abort)
command was completed by clicking the Cancel button.
14 After the transfer screen disappears, the controller will automatically restart
with the new firmware.
NOTE:
In duplex mode (dual controllers), the second controller's firmware
is automatically updated during the restart procedure.
Chapter 4 - Managing and Monitoring
Xmodem Send File Screen
Updating the Controller Firmware
121
Advertisement
Table of Contents
