Table of Contents
Advertisement
Appendix B - Port Information
DC Power Supply Connector Pinout
CAUTION:
A DC power cable is included with the 48VDC Power Supplies and is used to
connect to a DC power feed system.
NOTE:
Before connecting the cable to the source, be sure the wiring has the correct pin
out as indicated below. The connectors are Molex type, plug P/N 50-84-1060 and
female socket P/N 02-08-1002.
160
DC Power Supply Connector Pinout
If the enclosure is connected to a DC power feed source that is not
within the designated -48VDC range, damage might occur to the unit.
Use only the DC power cables provided with the system.
BLACK
GREEN/YELLOW
48VDC
48VDC
RED
RED
-48VDC
-48VDC
BLACK
GND
GND
GREEN/YELLOW
Pin
Signal Name
Top Left
+ 48 VDC
Top Right
+ 48 VDC
Middle Left
- 48 VDC
Middle Right
- 48 VDC
Lower Left
GND
Lower Right
GND
DC Cable Wiring Signals
Advertisement
Table of Contents
