Table of Contents
Advertisement
Chapter 3 - Setup and Installation
5
96
Disk Expansion – Daisy-Chaining
b
Connect another data cable from the "D2" connector on the upper Disk
I/O card installed in the primary RAID enclosure to the "D1" connector
on the upper Disk I/O card in the daisy-chain enclosure.
NexStor 4000F
NexStor 4911F/4912F/4931F/4932F
Daisy-Chain Enclosure Cabling Diagram
NOTE:
When using dual loop topologies, you will be required to install and
use volume management software.
Repeat the above steps for each additional daisy-chained enclosure.
D1
Connect to D2 Ports
on both Disk I/O Cards
D1
D2
Connect to D1 Ports
on both Disk I/O Cards
D2
H0
H1
H0
H1
TEST
NETWORK
ONLY
SERVICE
Advertisement
Table of Contents
