Table of Contents
Advertisement
Chapter 4 - Managing and Monitoring
Power-On LED
The Power-On LED signifies that the enclosure is powered on and will be
illuminated green when power has been applied.
Channel Status LED
The LED indicates the status of the logical array(s). It will change to amber when
the system detects a problem with a logical array. The LED will also indicate a
failed controller by alternately blinking green and amber if a failure does occurs.
Power Supply Status
The Power Supply Status LED indicates the condition of the power supplies. The
LED will illuminate steady green when both power supplies are functioning
normally and will change to amber if one of the power supplies should fail or be
turned off.
A suspect faulty power supply can also be identified by the illumination of the
amber "Fault" LED located on the individual power supply.
104
Power-On LED
Drive Slot Locations
Drive LEDs
Slot 1
Slot 4
Slot 2
Slot 5
Slot 3
Slot 6
Slot 7
Slot 10
Slot 8
Slot 11
Slot 9
Slot 12
Front Bezel LED Identification
Cooling Fan Status LED
Power Supply Status LED
Channel Status LED
Power On LED
RESET ALARM
Alarm Reset Button
(Press and hold for
One-Touch Annunciation)
Advertisement
Table of Contents
