Table of Contents
Advertisement
If you wish to manually configure your network setting, enter the correction
information in the appropriate fields.
Enter a "new" password and confirm the new password. Click the Configure
button.
6
If you have additional uninitialized embedded module, select the next MAC
address and choose the appropriate settings.
Once you have completed configuring all the uninitialized embedded
modules and have clicked the Configure button, the wizard will display a
popup message indicating all systems have been configured. It will then
re-scan for systems and if none are found it will take you to the Initialized
screen. If someone plugs in a uninitialized module system to the network
(same subnet mask) during the time of the rescan or resets a system's
password back to the defaults, you will be taken Uninitialized screen.
Embedded StorView Setup Wizard - Initialized Screen
7
Note the MAC address of the embedded module you wish to start, select it
and click the Launch StorView button.
8
Your default web browser will open with a login screen. Enter the login
name and "new" password and click OK. The StorView Main screen will
open.
Chapter 3 - Setup and Installation
Embedded StorView Initial Setup
101
Advertisement
Table of Contents
