Table of Contents
Advertisement
About this Manual
x
Features
Dual 2 Gb/sec (gigabit per second) Fibre Channel ports per Host I/O card.
■
Fabric ports are optimized with full duplex operations and auto-negotiate
features.
Dual 2 Gb/sec disk side ports for high performance, failure resilient paths
■
to the drives. Full duplex operations optimize disk channels.
Capable of sustaining 350 MB/sec sequential RAID 5 reads and up to
■
100,000 IOPs in active-active configurations.
Support for up to 512 logical drives.
■
Support for RAID levels 0, 1, 5, 10, and 50.
■
Online capacity expansion allowing reconfiguration without interruptions.
■
Dynamic Drive Addressing where the drives do not require hard
■
addressing, allowing for increased flexibility in configurations.
Built-in support for drive firmware updates, allowing one or several disk
■
drives to be updated in parallel.
Host-based StorView Management Suite software. StorView is the
■
GUI-based software that provides the robust and easy-to-use configuration
and monitoring tool.
VT-100 interface for configuration and monitoring.
■
Controller firmware updates can be accomplished through a VT-100
■
terminal or StorView Storage Management Software.
Host clustering support for maximum data availability.
■
Advertisement
Table of Contents
