Table of Contents
Advertisement
The Enclosure Terminal Utility menu will appear.
7
Select option "5" Firmware Upload by pressing the <5> key.
8
Press the <u> key (lower case) to start the upload. Using the mouse, click on
the pull-down menu Transfers and select "Send."
9
Click the browse button and locate the new Firmware file and click "Send."
The firmware file name will be similar to "k305.s3r."
Enclosure Terminal Utility Screen
Upload Firmware Screen
Send File Screen
Chapter 4 - Managing and Monitoring
Updating SES Controller Card Firmware
113
Advertisement
Table of Contents
