Table of Contents
Advertisement
6
Connect the Fibre Channel data cable(s).
a
Connect your host(s) to the switch.
b
Connect a data cable from a switch port to the "H1" connector on the
right Host I/O card.
c
Connect a data cable from another switch port to the "H0" connector on
the left Host I/O card.
NexStor 4921F/4922F/4941F/4942F
Switch
Host Server: Node A
Host Server: Node B
Multi-Port Mirrored SAN Attach-Single Switch Connection Cabling Diagram
7
(Embedded StorView only) Connect a CAT 5e ethernet cable from the RAID
Controller network port to your ethernet switch or LAN. Connect a second
CAT 5e ethernet cable from the second RAID Controller to another network
connection.
Chapter 3 - Setup and Installation
D1
D2
H0
(Embedded StorView)
FC HBA
FC HBA
Multi-Port Mirrored SAN Attach-Single Switch Configuration
H1
H0
H1
TEST
NETWORK
SERVICE
ONLY
NETWORK
TEST
ONLY
SERVICE
89
Advertisement
Table of Contents
