Kikusui PLZ164W User Manual page 79

Menu
1. Setu p
2. Confi g uration
3. Calibration
4. Model Info
PREV NEXT
Confi g uration
1. Master/Slave
2. Power On
3. Interface
4. External
PREV NEXT
Power On
Load On : OFF
Ke y Lock : ON
PREV
PLZ-4W
2. Select the menu setup.
Press the MENU (SHIFT + SET/VSET) key.
The menu appears.
3. Select Configuration
Press the or
lighted on the menu. When highlighted, press the ENTER key.
4. Select Power On.
Press the or
the menu. When highlighted, press the ENTER key.
5. Select key lock.
Press the CURSOR key to move the blinking cursor by Key Lock on the
menu.
Turn the rotary knob to the right to display ON and left to display OFF. To lock
the PLZ-4W at power on, select ON.
6. Exit from the menu.
Press the MENU (SHIFT + SET/VSET) key.
The display returns to the basic setting entry condition (the characters
"SET" is highlighted).
When you turn on the PLZ-4W the next time, it will be locked.
To perform panel operation, hold down LOCK (SHIFT+LOCAL) for a few
seconds until a beep is heard to release the lock.
CURSOR key several times until Configuration is high-
CURSOR key several times until Power On is highlighted on
Basic Operation 5-23