Kikusui PLZ164W User Manual page 120

10.00 STEP:0014
A
M1
6-34 Applied Operation
The following three items are specified.
Step number
Current value
Presence or absence of trigger output
Press the or key to select the item, and turn the rotary knob to set the value or
symbol.
11. Set step 1.
Press the or
Turn the rotary knob to set the step to 0001.
Press the key to move the cursor to the current value, and turn the rotary
knob to set the current value of step 1 to 10 A.
12. Set step 2.
Press the key to select the step number.
Turn the rotary knob to set the step to 0002.
Press the key to move the cursor to the current value, and turn the rotary
knob to set the current value of step 2 to 10 A.
13. Set step 3 to 5.
Select the step number in the same fashion as step 12, and set the current value
to 10 A.
14. Set step 6.
Select the step number in the same fashion as step 12, and set the current value
to 5 A. Next, press the
and turn the rotary knob to select T.
15. Set steps 7 to 10.
Select the step number in the same fashion as step 12, and set the current value
to 10 A.
16. Set step 11.
Select the step number in the same fashion as step 14, and set the current value
to 5 A.
But, for this step, the trigger is not set.
17. Set steps 12 to 15.
Select the step number in the same fashion as step 12, and set the current value
to 10 A.
18. Finish editing.
The settings are shown within a rectangular frame on the screen. For a descrip-
tion of the monitor operation, see below.
Pressing the PREV (SHIFT+
key to select the step number.
key to move the cursor to the trigger setting position,
) returns to the previous page.
PLZ-4W