Kikusui PLZ164W User Manual page 68

5-12 Basic Operation
3. Select the current range and voltage range.
Press the RANGE key to select the current range.
Press the VRANGE (SHIFT+RANGE) key to select the voltage range.
4. Set the current and voltage values.
Check that the display is in the basic setting entry condition (the characters
"SET" is highlighted).
While viewing the display, turn the rotary knob.
To switch between current and voltage settings, press the SET/VSET key.
5. Turn on the load.
Press the LOAD key.
The LOAD LED illuminates, and the current flows.
The display shows the measured values (voltage, current, and wattage)
at the load input terminal.
6. Change the current or voltage setting.
Turn the rotary knob to change the setting.
To switch between current and voltage settings, press the SET/VSET key.
7. Turn off the load.
Press the LOAD key.
The LOAD LED turns off, and the current is cut off.
PLZ-4W