Kikusui PLZ164W User Manual page 106

Program operation
Step setting
Step execution time
Step execution pattern
6-20 Applied Operation
Table6-3 Setup items on each setup screen
Edit screen Setup item
No.
Memo
Mode
Range
Loop
Last Load
Last Set
Chain
CC SET
CR SET
CV SET
CP SET
h:min:s.ms
LOAD
RAMP
TRIG
PAUSE
Description
Program number (1 to 10)
Memo (11 characters)
Operation mode (CC, CR, CV, or CP)
Range setting (Current range - Voltage range)
Number of program loops
(1 to 9999) 9999 is infinite loop
Load condition after the end of the sequence
(ON/OFF)
Current value after the end of the sequence
(0.000 to 100 % of the range setting)
The number of the next program to be executed
after the end of the this program (OFF, 1 to 10)
Setting executed in the step
(A, mS, V, or W)
Hours:minutes:seconds
(0.00:00.001 to 999.59:--.---)
Load on/off
Current transition (ON/OFF)
Trigger output (ON/OFF)
Pause condition (ON/OFF)
PLZ-4W