Kikusui PLZ164W User Manual page 116

Program operation
FILL
Trigger signal
Magnification
6-30 Applied Operation
Table6-4 Setup items on each setup screen
Edit screen Setup item
No.
Memo
Mode
Range
Loop
Last Load
Last Set
RPTSTEP
TIME BASE
DATA1
DATA2
START
STOP
TRIG
M1,2,3,4,5,6,7,8
Description
Program number (11)
Memo (11 characters)
Operation mode (CC or CR)
Range setting (Current range - Voltage range)
Number of program loops
(1 to 9999) 9999 is infinite loop
Load condition after the end of the sequence
(ON/OFF)
Current value after the end of the sequence
(0.000 to 100 % of the range setting)
Last step number (3 to 1024) per loop
Step execution time (25 s to 100 ms)
Current for the start step
(0.000 to 100 % of the range setting)
Current for the end step
(0.000 to 100 % of the range setting)
Start step number
End step number
Trigger output (ON/OFF)
The value indicates the number of skipped steps.
PLZ-4W