Kikusui PLZ164W User Manual page 109

SEQ
Last Load : OFF
Last Set : 0.000
A
Chain : OFF
PREV NEXT
SEQ
Last Load : OFF
Last Set : 0.000
A
Chain : 2
PREV NEXT
SEQ EDIT
CC SET [ A ]
END
TOTAL 000
PREV NEXT
SEQ EDIT
CC SET [ A ]
7.000
001 A
END
TOTAL 001
PREV NEXT
SEQ EDIT
CC SET [ A ]
001
7.000
A
002 7.000
A
END
TOTAL 002
PREV NEXT
SEQ EDIT
CC SET [ A ]
001 7.000
A
002 7.000
A
003 0.500
A
END
TOTAL 003
PREV NEXT
PLZ-4W
8. Set the current setting after the end of the program. (Last Set :)
Turn the rotary knob to set the current value.
Since the load is turned off at the end of program 1, select 0 A. However,
because the sequence continues to program 2 in this example (step 9), this set-
ting is ignored.
After selecting the current setting, move the
next item.
9. Set the number of the next program to be executed after the end of pro-
gram 1. (Chain :)
Turn the rotary knob to set the number of the program to be executed next.
Since the sequence executes program 2 after the end of program 1, set 2.
Press the NEXT (SHIFT+
screen (SEQ EDIT).
■ Setting the steps of program 1
We will set the current setting, execution time, and execution pattern of each
step of program 1.
Each item is set on separate screens. Here, we will set the current setting first
followed by the execution time followed by the execution pattern.
10. Insert a step line.
On the initial screen, nothing is set for the step, and END of the last line is
highlighted.
Press the INS (SHIFT+
001.
11. Set the current value of step 1.
On the initial screen, the current is set to 0.000.
Turn the rotary knob to set the current value of step 1 to 7 A.
12. Set the current value of step 2.
Move the cursor to END and press the INS (SHIFT+
Step line 002 is inserted. Like step 1, turn the rotary knob to set the current
value of step 2 to 7 A.
13. Set the current value of step 3.
Move the cursor to END and press the INS (SHIFT+
Step line 003 is inserted. Like step 1, turn the rotary knob to set the current
value of step 3 to 0.5 A.
After setting the current values, press the NEXT (SHIFT+
ENTER key to move to the next edit screen.
CURSOR key to move to the
) key or ENTER key to move to the next edit
) key with END highlighted to insert the step line
) key.
) key.
) key or the
Applied Operation 6-23