Kikusui PLZ164W User Manual page 112

SEQ
No. : 2
Memo : Pro g ram2
Mode : NCC
Ran g e : 33A, 150V
Loop : 0001
PREV NEXT
SEQ EDIT
CC SET [ A ]
001 10.000
A
002 5.000
A
003 8.000
A
END
TOTAL 003
PREV NEXT
6-26 Applied Operation
■ Reediting and confirming the sequence
The program that you create is saved by the backup function even when the power is
turned off. To confirm or reedit programs you have created, select sequence edit
again.
1. Select sequence edit.
Press the EDIT (SHIFT+A) key.
The program edit (SEQ) screen appears.
2. Select the number of the program you wish to confirm or edit.
Turn the rotary knob to display the number of the program you wish to confirm
or edit.
When you select a program number, the corresponding program operation is
displayed.
Press the NEXT (SHIFT+
screen.
Press the PREV (SHIFT+
Switch the screen as you like and confirm or edit the settings.
• Inserting steps
Press the or
insert is highlighted. When the step line is highlighted, press the INS (SHIFT+
) key. A new step line is inserted above the line where the cursor was.
• Deleting steps
Press the or
lighted. When the step line is highlighted, press the DEL (SHIFT+
The step line at the cursor position is deleted.
3. Finish editing.
Pressing the PREV (SHIFT+
Press the PREV (SHIFT+
played to return to the screen before entering the sequence edit screen.
) key or ENTER key to move to the next edit
) to return to the previous screen.
CURSOR key so that the step line below the line you wish to
CURSOR key so that the line you wish to delete is high-
) returns to the previous page.
) key when the program edit (SEQ) screen is dis-
) key.
PLZ-4W