1. The X indicates that the user can perform the actions.
The — indicates that the privilege to perform an action is not available to the user.
2.
3. Provisioner user cannot change node name, contact, or AIS-V insertion on STS-1 signal degrade (SD) parameters.
4. The action buttons in the subtab are active for all users, but the actions can be completely performed only by the users with the required security levels.
Table 9-2
Table 9-2
ONS 15454 Security Levels—Network View
CTC Tab
Subtab
Alarms
—
Conditions
—
History
—
Circuits
Circuits
Rolls
Provisioning Security
Alarm Profiles
BLSR
Overhead Circuits
Provisionable
Patchcords (PPC)
Server Trails
Maintenance Software
Diagnostic
1. The X indicates that the user can perform the actions.
The — indicates that the privilege to perform an action is not available to the user.
2.
3. The action buttons in the subtab are active for all users, but the actions can be completely performed only by the users with the required security levels.
OL-9217-01
shows the actions that each user privilege level can perform in network view.