Chapter 1
Shelf and Backplane Hardware
Figure 1-32
1.11.1 Fiber Management
The jumper routing fins are designed to route fiber jumpers out of both sides of the shelf. Slots 1 to 6
exit to the left, and Slots 12 to 17 exit to the right.
slots, down through the fins, then exiting out the fiber channel to the left. The maximum capacity of the
fiber routing channel depends on the size of the fiber jumpers.
of the fiber channel for each side of the shelf, for the different fiber sizes.
Figure 1-33
OL-9217-01
Managing Cables on the Front Panel
F A N
F A IL
C R
IT
M A
J
M IN
Cable-routing
channel posts
Fold down
front door
Fiber Capacity
Figure 1-33
Fiber guides
Cisco ONS 15454 Reference Manual, R7.0.1
1.11 1.11.1 Fiber Management
shows fibers routed from cards in the left
Table 1-23
gives the maximum capacity
1-53