A.5 A.5.7 DS3-12E and DS3N-12E Card Specifications
•
A.5.7 DS3-12E and DS3N-12E Card Specifications
The DS3-12E and DS3N-12E cards have the following specifications:
•
•
Cisco ONS 15454 Reference Manual, R7.0.1
A-22
Overvoltage protection: As in ITU-T G.703 Annex B
–
Operating temperature: +23 to +113 degrees Fahrenheit (–5 to +45 degrees Celsius)
–
Operating humidity: 5 to 95 percent, noncondensing
–
Power consumption: 26.80 W, 0.56 A at –48 V, 91.5 BTU/hr
–
Dimensions
Height: 12.650 in. (321.3 mm)
–
Width: 0.716 in. (18.2 mm)
–
Depth: 9.000 in. (228.6 mm)
–
Depth with backplane connector: 9.250 in. (235 mm)
–
Weight not including clam shell: 1.9 lb (0.8 kg)
–
Input
–
Bit rate: 44.736 Mbps +/– 20 ppm
–
Frame format: DS-3 ANSI T1.107-1988
–
Line code: B3ZS
Termination: Unbalanced coaxial cable
–
Input impedance: 75 ohms +/–5 percent
–
Cable loss: Max 450 feet 734A, RG-59, 728A/Max 79 feet RG-179
–
AIS: TR-TSY-000191 compliant
–
Output
Bit rate: 44.736 Mbps +/– 20 ppm
–
Frame format: DS-3 ANSI T1.107-1988
–
Line code: B3ZS
–
Termination: Unbalanced coaxial cable
–
–
Input impedance: 75 ohms +/–5 percent
–
Cable loss: Max 450 feet 734A, RG-59, 728A/Max 79 feet RG-179
–
AIS: TR-TSY-000191 compliant
Power level: –1.8 to +5.7 dBm
–
The power level is for a signal of all ones and is measured at a center frequency of
Note
22.368 MHz (3 +/–1 kHz) bandwidth.
–
Pulse shape: ANSI T1.102-1988 Figure 8
Pulse amplitude: 0.36 to 0.85 V peak-to-peak
–
Loopback modes: Terminal and facility
–
Line build out: 0 to 225 feet (0 to 68.8 meters); 226 to 450 feet (68.9 to 137.2 meters)
–
Appendix A
Hardware Specifications
OL-9217-01