A.6 A.6.17 15454_MRC-12 Card Specifications
A.6.17 15454_MRC-12 Card Specifications
The 15454_MRC-12 card has the following specifications:
•
•
•
Cisco ONS 15454 Reference Manual, R7.0.1
A-42
1535.82 +/– 0.040 nm, OC192 LR/STM64 LH ITU 1535.82
–
1536.61 +/– 0.040 nm, OC192 LR/STM64 LH ITU 1536.61
–
1538.19 +/– 0.040 nm, OC192 LR/STM64 LH ITU 1538.19
–
1538.98 +/– 0.040 nm, OC192 LR/STM64 LH ITU 1538.98
–
1539.77 +/– 0.040 nm, OC192 LR/STM64 LH ITU 1539.77
–
1540.56 +/– 0.040 nm, OC192 LR/STM64 LH ITU 1540.56
–
ITU grid red band:
1550.12 +/– 0.040 nm, OC192 LR/STM64 LH ITU 1550.12
–
1550.92 +/– 0.040 nm, OC192 LR/STM64 LH ITU 1550.92
–
1551.72 +/– 0.040 nm, OC192 LR/STM64 LH ITU 1551.72
–
1552.52 +/– 0.040 nm, OC192 LR/STM64 LH ITU 1552.52
–
–
1554.13 +/– 0.040 nm, OC192 LR/STM64 LH ITU 1554.13
–
1554.94 +/– 0.040 nm, OC192 LR/STM64 LH ITU 1554.94
–
1555.75 +/– 0.040 nm, OC192 LR/STM64 LH ITU 1555.75
1556.55 +/– 0.040 nm, OC192 LR/STM64 LH ITU 1556.55
–
Line
Bit rate: up to OC-48 (2488.320 Mbps), depending on SFP
–
Each optical interface on the card can be configured as OC-3, OC-12, or OC-48, depending
Note
on the available backplane bandwidth and existing provisioned lines. In general, the card
supports all different rates on the line side as long as the accumulated bandwidth does not
exceed the total backplane allowed bandwidth.
–
Fiber: 1550-nm single-mode
–
Connectors: LC duplex connector for each SFP
Compliance: Telcordia GR-253-CORE
–
Transmitter
Maximum transmitter output power: Depends on SFP (see
–
Specifications, page
A-4)
Minimum transmitter output power: Depends on SFP (see
–
Specifications, page
A-4)
–
Center wavelength: See wavelength plan
Center wavelength accuracy: 1 nm to 4 nm, depending on SFP
–
Transmitter: FP and DFB laser
–
Receiver
Appendix A
Hardware Specifications
A.2 SFP, XFP, and GBIC
A.2 SFP, XFP, and GBIC
OL-9217-01