Table 16-10 Oids Supported In The Alarmtable; Row Creation In Alarmtable - Cisco ONS 15454 Reference Manual

Chapter 16 SNMP

16.10.6.2 Row Creation in alarmTable

To create a row in the alarmTable, the SetRequest PDU must be able to create the row in one single-set
operation. All OIDs in the SetRequest PDU should be type OID.0 type for entry creation. The table has
a maximum number of 256 rows.
To create a SetRequest PDU for the alarmTable, the following values are required:
•
•
•
•
•
•
If the SetRequest PDU is valid, a historyControlTable row is created. If the row already exists, or if the
SetRequest PDU values do not make sense or are insufficient, the SNMP agent does not create the row
and returns an error code.
In addition to the required values, the following restrictions must be met in the SetRequest PDU:
•
•
•
•
•
Table 16-10
No. Column Name
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
OL-9217-01
The alarmInterval and its desired value
The alarmVariable and its desired value
The alarmSampleType and its desired value
The alarmStartupAlarm and its desired value
The alarmOwner and its desired value
The alarmStatus with a value of createRequest (2)
The alarmOwner is a string of length 32 characters.
The alarmRisingEventIndex always takes value 1.
The alarmFallingEventIndex always takes value 2.
The alarmStatus has only two values supported in SETs: createRequest (2) and invalid (4).
The AlarmVariable is of the type OID.ifIndex, where ifIndex gives the interface this alarm is created
on and OID is one of the OIDs supported in
OIDs Supported in the AlarmTable
ifInOctets
IfInUcastPkts
ifInMulticastPkts
ifInBroadcastPkts
ifInDiscards
ifInErrors
ifOutOctets
ifOutUcastPkts
ifOutMulticastPkts
ifOutBroadcastPkts
ifOutDiscards
Dot3StatsAlignmentErrors
Dot3StatsFCSErrors
Dot3StatsSingleCollisionFrames
Dot3StatsMultipleCollisionFrames
Table 16-10.
OID
{1.3.6.1.2.1.2.2.1.10}
{1.3.6.1.2.1.2.2.1.11}
{1.3.6.1.2.1.31.1.1.1.2}
{1.3.6.1.2.1.31.1.1.1.3}
{1.3.6.1.2.1.2.2.1.13}
{1.3.6.1.2.1.2.2.1.14}
{1.3.6.1.2.1.2.2.1.16}
{1.3.6.1.2.1.2.2.1.17}
{1.3.6.1.2.1.31.1.1.1.4}
{1.3.6.1.2.1.31.1.1.1.5}
{1.3.6.1.2.1.2.2.1.19}
{1.3.6.1.2.1.10.7.2.1.2}
{1.3.6.1.2.1.10.7.2.1.3}
{1.3.6.1.2.1.10.7.2.1.4}
{1.3.6.1.2.1.10.7.2.1.5}
Cisco ONS 15454 Reference Manual, R7.0.1
16.10 16.10.6 Alarm RMON Group
Status
—
—
Unsupported in E100/E1000
Unsupported in E100/E1000
Unsupported in E100/E1000
—
—
—
Unsupported in E100/E1000
Unsupported in E100/E1000
Unsupported in E100/E1000
—
—
—
—
16-21