Backplane Covers - Cisco ONS 15454 Reference Manual

1.4 1.4 Backplane Covers

Figure 1-7
The front door label also includes the Class I and Class 1M laser warning
Note
Figure 1-8
1.4 Backplane Covers
If a backplane does not have an EIA panel installed, it should have two sheet metal backplane covers
(one on each side of the backplane) as shown in
with nine 6-32 x 3/8 inch Phillips screws.
See the
Note
Cisco ONS 15454 Reference Manual, R7.0.1
1-10
Front-Door Erasable Label
Laser Warning on the Front-Door Label
"1.5 Electrical Interface Assemblies" section on page 1-14
Chapter 1
(Figure
Figure 1-9 on page 1-11. Each cover is held in place
for information on EIAs.
Shelf and Backplane Hardware
1-8).
OL-9217-01