Xc10G Hosting Ds3Xm-6 Or Ds3Xm-12; Xc10G Card-Level Indicators; Table 2-17 Xc10G Card-Level Indicators - Cisco ONS 15454 Reference Manual

Hide thumbs Also See for ONS 15454:
Table of Contents

Advertisement

Chapter 2
Common Control Cards
Table 2-16
ONS 15454 VT Number
VT12
VT13
VT14
VT15
VT16
VT17
VT18
VT19
VT20
VT21
VT22
VT23
VT24
VT25
VT26
VT27
VT28

2.5.3 XC10G Hosting DS3XM-6 or DS3XM-12

A DS3XM card can demultiplex (map down to a lower rate) M13-mapped DS-3 signals into 28 DS-1s
that are then mapped to VT1.5 payloads. The VT1.5s can then be cross-connected by the XC10G card.
The XC10G card can host a maximum of 336 bidirectional VT1.5s.

2.5.4 XC10G Card-Level Indicators

Table 2-17
Table 2-17
Card-Level Indicators
Red FAIL LED
ACT/STBY LED
Green (Active)
Amber (Standby)
OL-9217-01
VT Mapping (continued)
Telcordia Group/VT Number
Group5/VT2
Group6/VT2
Group7/VT2
Group1/VT3
Group2/VT3
Group3/VT3
Group4/VT3
Group5/VT3
Group6/VT3
Group7/VT3
Group1/VT4
Group2/VT4
Group3/VT4
Group4/VT4
Group5/VT4
Group6/VT4
Group7/VT4
describes the two card-level LEDs on the XC10G faceplate.
XC10G Card-Level Indicators
Definition
Indicates that the cards processor is not ready. This LED illuminates during
reset. The FAIL LED flashes during the boot process. Replace the card if the
red FAIL LED persists.
Indicates whether the XC10G is active and carrying traffic (green), or in
standby mode to the active XC10G card (amber).
2.5 2.5.3 XC10G Hosting DS3XM-6 or DS3XM-12
Cisco ONS 15454 Reference Manual, R7.0.1
2-21

Advertisement

Table of Contents
loading

Table of Contents