Ml100T-12 Card - Cisco ONS 15454 Reference Manual

Chapter 5 Ethernet Cards
Table 5-14
Port-Level LED Status
Solid green
Flashing green

5.8 ML100T-12 Card

For hardware specifications, see the
Note
The ML100T-12 card provides 12 ports of IEEE 802.3-compliant, 10/100 interfaces. Each interface
supports full-duplex operation for a maximum bandwidth of 200 Mbps per port and 2.488 Gbps per card.
Each port independently detects the speed of an attached device (autosenses) and automatically connects
at the appropriate speed. The ports autoconfigure to operate at either half or full duplex and can
determine whether to enable or disable flow control. For ML-Series configuration information, see the
Ethernet Card Software Feature and Configuration Guide for the Cisco ONS 15454, Cisco ONS 15454
SDH, and Cisco ONS 15327.
Figure 5-7
Shielded twisted-pair cabling should be used for inter-building applications.
Caution
OL-9217-01
G1K-4 Port-Level Indicators (continued)
Description
A link exists to the Ethernet port, but no traffic is carried on the port.
A link exists to the Ethernet port, and traffic is carried on the port. The LED
flash rate reflects the traffic rate for the port.
"A.7.8 ML100T-12 Card Specifications" section on page
shows the card faceplate and block diagram.
5.8 5.8 ML100T-12 Card
Cisco ONS 15454 Reference Manual, R7.0.1
A-47.
5-19