Hardware Specifications - Cisco ONS 15454 Reference Manual

Hardware Specifications

The terms "Unidirectional Path Switched Ring" and "UPSR" may appear in Cisco literature. These terms
Note
do not refer to using Cisco ONS 15xxx products in a unidirectional path switched ring configuration.
Rather, these terms, as well as "Path Protected Mesh Network" and "PPMN," refer generally to Cisco's
path protection feature, which may be used in any topological network configuration. Cisco does not
recommend using its path protection feature in any particular topological network configuration.
This appendix contains hardware and software specifications for the ONS 15454.
A.1 Shelf Specifications
This section provides specifications for shelf bandwidth; a list of topologies; Cisco Transport Controller
(CTC) specifications; LAN, TL1, modem, alarm, and electrical interface assembly (EIA) interface
specifications; timing, power, and environmental specifications; and shelf dimensions.
A.1.1 Bandwidth
The ONS 15454 has the following bandwidth specifications:
•
•
•
A.1.2 Configurations
The ONS 15454 can be configured as follows:
•
•
•
•
•
•
OL-9217-01
Total bandwidth: 240 Gbps
Data plane bandwidth: 160 Gbps
SONET plane bandwidth: 80 Gbps
Two-fiber path protection
Path protected mesh network (PPMN)
Two-fiber bidirectional line switch ring (BLSR)
Four-fiber BLSR
Add-drop multiplexer (ADM)
Terminal mode
A P P E N D I X
Cisco ONS 15454 Reference Manual, R7.0.1
A
A-1