Figure 15-19 Pm Read Points On The Ds3/Ec1-48 Card - Cisco ONS 15454 Reference Manual

15.5 15.5.9 DS3-EC1-48 Card Performance Monitoring Parameters
Figure 15-19 PM Read Points on the DS3/EC1-48 Card
ONS 15454
DS3 CV-L
DS3 ES-L
DS3 SES-L
DS3 LOSS-L
DS3 AISS-P
DS3 CVP-P
DS3 ESP-P
DS3 SASP-P
DS3 SESP-P
DS3 UASP-P
DS3 CVCP-P
DS3 ESCP-P
DS3 SASCP-P
DS3 SESCP-P
DS3 UASCP-P
DS3 CVCP-PFE
DS3 ESCP-PFE
DS3 SASCP-PFE
DS3 SESCP-PFE
DS3 UASCP-PFE
PMs read on LIU
Table 15-12
Table 15-12
DS3 Line (NE)
CV-L
ES-L
SES-L
LOSS-L
1. The C-Bit PMs (PMs that contain the text "CP-P") are applicable only if the line format is C-Bit.
2. DS3/EC1-48 cards support SAS-P only on the Rx path.
3. The SASCP parameter is also displayed as "undefined" for near-end parameter though it is a far-end parameter.
Cisco ONS 15454 Reference Manual, R7.0.1
15-28
DS3/EC1-48 Card
LIU
PMs read on Mapper Unit ASIC
The DS3 path is terminated on the
transmux and regenerated.
lists the PM parameters for the DS3/EC1-48 cards.
DS3/EC1-48 Card PMs
DS3 Path (NE)
AISS-P
CVP-P
ESP-P
2
SASP-P
SESP-P
UASP-P
ESCP-P
3
SASCP-P
SESCP-P
UASCP-P
CVCP-P
Mapper Unit
SONET Side
STS CV-P
STS ES-P
STS FC-P
STS SES-P
STS UAS-P
Path
STS CV-PFE Level
STS ES-PFE
STS FC-PFE
STS SES-PFE
STS UAS-PFE
1
STS Path (NE)
CV-P
ES-P
SES-P
UAS-P
FC-P
Chapter 15 Performance Monitoring
XC Card(s)
BTC
ASIC
1
DS3 Path (FE) STS Path (FE)
CVCP-PFE CV-PFE
ESCP-PFE ES-PFE
SASCP-PFE SES-PFE
SESCP-PFE UAS-PFE
UASCP-PFE FC-PFE
OC-N
OL-9217-01