Cisco ONS 15454 Reference Manual page 520

15.6 15.6.3 ML-Series Ethernet Card Performance Monitoring Parameters
Table 15-18
Parameter
mediaIndStatsRxShort
Pkts
hdlcInOctets
hdlcRxAborts
hdlcOutOctets
Table 15-19
Parameter
etherStatsDropEvents
rx PktsDroppedInternal
Congestion
gfpStatsRxFrame
gfpStatsTxFrame
gfpStatsRxOctets
gfpStatsTxOctets
gfpStatsRxSBitErrors
gfpStatsRxMBitErrors
gfpStatsRxTypeInvalid
gfpStatsRxCRCErrors
gfpStatsLFDRaised
gfpStatsCSFRaised
mediaIndStatsRxFrames
Truncated
mediaIndStatsRxFramesToo
Long
mediaIndStatsRxShortPkts
Cisco ONS 15454 Reference Manual, R7.0.1
15-36
ML-Series POS Ports Parameters for HDLC Mode (continued)
Definition
Number of received packets that are too small.
Number of bytes received (from the SONET/SDH path) prior to the bytes
undergoing HLDC decapsulation by the policy engine.
Number of received packets aborted on input.
Number of bytes transmitted (to the SONET/SDH path) after the bytes
undergoing HLDC encapsulation by the policy engine.
ML-Series POS Ports Parameters for GFP-F Mode
Meaning
Number of received frames dropped at the port level.
Number of received packets dropped due to overflow in the frame
buffer.
Number of received GFP frames.
Number of transmitted GFP frames.
Number of GFP bytes received.
Number of GFP bytes transmitted.
Sum of all the single bit errors. In the GFP CORE HDR at the
GFP-T receiver, these are correctable.
Sum of all the multiple bit errors. In the GFP CORE HDR at the
GFP-T receiver, these are uncorrectable.
Number of receive packets dropped due to Client Data Frame UPI
errors.
Number of packets received with a payload FCS error.
Count of core HEC CRC multiple bit errors.
Note
Number of GFP Client signal fail frames detected at the GFP-T
receiver.
Number of received frames that are too long. The maximum is the
programmed maximum frame size (for VSAN support); if the
maximum frame size is set to default, then the maximum is the 2112
byte payload plus the 36 byte header, which is a total of 2148 bytes.
Number of received frames with CRC error.s
Number of received packets that are too small.
This count is only of eHec multiple bit errors when in frame.
This can be looked at as a count of when the state machine
goes out of frame.
Chapter 15 Performance Monitoring
OL-9217-01