Cisco ONS 15454 Reference Manual page 611

Appendix B Administrative and Service States
Table B-4
Current Service State
OOS-AUMA,MEA & UAS
OOS-AUMA,MT & SWDL
OOS-AUMA,MT & UEQ
OOS-AUMA,UAS
OOS-AUMA,UAS & UEQ
OOS-MA,MT
B.3.2 Port and Cross-Connect Service State Transitions
Table B-5
cross-connect states with one exception. A cross-connect in the OOS-AU,AINS service state cannot
transition autonomously into the IS-NR service state until the parent port is IS-NR.
The following ports do not support all of the service states listed in
•
•
Deleting a port or cross-connect removes the entity from the system. The deleted entity does not
Note
transition to another service state.
The DS1 port service state on the DS3XM-12 card is based on the DS3 service state.
Note
OL-9217-01
ONS 15454 Card Service State Transitions (continued)
lists the port and cross-connect service state transitions. Port states do not impact
E-Series Ethernet ports do not support service states; these ports are either enabled or disabled.
FC_MR-4 ports support the IS-NR; OOS-MA,DSBLD; and OOS-MA,MT service states; they do not
support the OOS-AU,AINS service state.
B.3 B.3.2 Port and Cross-Connect Service State Transitions
Action
Remove the card.
Provision the card.
Restart completed.
Remove the card.
Change the administrative state
to IS.
Insert a valid card.
Insert an invalid card.
Delete the card.
Remove the card.
Provision an invalid card.
Provision a valid card.
Insert a valid card.
Insert an invalid card.
Preprovision a card.
Change the administrative state
to IS.
Delete the card.
Remove the card.
Reset the card.
Alarm/condition is raised.
Cisco ONS 15454 Reference Manual, R7.0.1
Next Service State
OOS-AUMA,UAS & UEQ
OOS-AU,MEA
OOS-MA,MT
OOS-AUMA,MT & UEQ
OOS-AU,UEQ
OOS-AUMA,MT & SWDL
OOS-AUMA,MEA & MT
OOS-AUMA,UAS & UEQ
OOS-AUMA,UAS & UEQ
OOS-AU,MEA
OOS-AU,SWDL
OOS-AU,SWDL
OOS-AUMA,MEA & UAS
OOS-AU,AINS & UEQ
IS-NR
OOS-AUMA,UAS
OOS-AUMA,MT & UEQ
OOS-AUMA,MT & SWDL
OOS-AUMA,FLT & MT
Table B-5:
B-5