A.6 A.6.1 OC3 IR 4/STM1 SH 1310 Card Specifications
OC48 LR/STM16 LH AS 1550, OC48 ELR 100 GHz, OC48 ELR 200 GHz, OC192 SR/STM64 IO 1310,
OC192 IR/STM64 SH 1550, OC192 LR/STM64 LH 1550, OC192 LR/STM64 LH ITU 15xx.xx,
15454_MRC-12 (12-port), OC192SR1/STM64IO Short Reach, and OC192/STM64 Any Reach cards.
For compliance information, refer to the Cisco Optical Transport Products Safety and Compliance
Information.
A.6.1 OC3 IR 4/STM1 SH 1310 Card Specifications
The OC3 IR 4/STM1 SH 1310 card has the following specifications:
•
•
•
•
•
Cisco ONS 15454 Reference Manual, R7.0.1
A-26
Line
Bit rate: 155.52 Mbps
–
–
Code: Scrambled non-return to zero (NRZ)
–
Fiber: 1310-nm single-mode
–
Loopback modes: Terminal and facility
–
Connector: SC
Compliance: Telcordia GR-253-CORE, ITU-T G.707, ITU-T G.957
–
Transmitter
Maximum transmitter output power: –8 dBm
–
Minimum transmitter output power: –15 dBm
–
Center wavelength: 1274 to 1356 nm
–
Nominal wavelength: 1310 nm
–
Transmitter: Fabry Perot (FP) laser
–
Extinction Ratio: 8.2 dB
–
Dispersion Ratio: 96 ps/nm
–
Receiver
–
Maximum receiver level: –8 dBm at BER 1 * 10 exp – 12
–
Minimum receiver level: –28 dBm at BER 1 * 10 exp – 12
Receiver: InGaAs/InP photodetector
–
Link loss budget: 13 dB
–
Receiver input wavelength range: 1274 to 1356 nm
–
Jitter tolerance: Telcordia GR-253/ITU-T G.823 compliant
–
Environmental
Operating temperature:
–
C-Temp (15454-OC34IR1310): +23 to +113 degrees Fahrenheit (–5 to +45 degrees Celsius)
I-Temp (15454-OC34I13-T): –40 to 149 degrees Fahrenheit (–40 to +65 degrees Celsius)
Operating humidity: 5 to 95 percent, noncondensing
–
Power consumption: 19.20 W, 0.40 A at –48 V, 65.56 BTU/hr
–
Dimensions
–
Height: 12.650 in. (321.3 mm)
Appendix A
Hardware Specifications
OL-9217-01