Ce-1000-4 Port-Level Indicators - Cisco ONS 15454 Reference Manual
Hide thumbs
Also See for ONS 15454:
- Procedure manual (850 pages) ,
- Troubleshooting manual (558 pages) ,
- Software feature and configuration manual (232 pages)
Table of Contents
Advertisement
Chapter 5
Ethernet Cards
5.12.2 CE-1000-4 Port-Level Indicators
The CE-1000-4 card provides a pair of LEDs for each Gigabit Ethernet port: an amber LED for activity
(ACT) and a green LED for link stat us (LINK).
represents.
Table 5-24
Port-Level Indicators
Off
Steady amber
Solid green
Flashing green
5.12.3 Cross-Connect and Slot Compatibility
The CE-1000-4 card can be installed in Slots 1 to 6 and 12 to 17 when used with the XC10G and
XC-VXC-10G cards. When the shelf uses the XCVT card, the CE-1000-4 card can only be installed in
Slots 5, 6, 12, and 13.
5.13 Ethernet Card GBICs and SFPs
This section describes the GBICs and SFPs used with the Ethernet cards.
The ONS 15454 Ethernet cards use industry standard small form-factor pluggable connectors (SFPs) and
gigabit interface converter (GBIC) modular receptacles. The ML-Series Gigabit Ethernet cards use
standard Cisco SFPs. The Gigabit E-Series, G-1K-4, and CE-1000-4 cards use standard Cisco GBICs.
With Software Release 4.1 and later, G-Series cards can also be equipped with dense wavelength division
multiplexing (DWDM) and coarse wavelength division multiplexing (CWDM) GBICs to function as
Gigabit Ethernet transponders.
For all Ethernet cards, the type of GBIC or SFP plugged into the card is displayed in CTC and TL1. Cisco
offers SFPs and GBICs as separate orderable products.
5.13.1 Compatibility by Card
Table 5-25
Caution
Use only GBICs and SFPs certified for use in Cisco Optical Networking Systems. The top assembly
numbers (TANs) for each GBIC and SFP are provided in
OL-9217-01
CE-1000-4 Port-Level Indicators
Description
No link exists to the Ethernet port.
A link exists to the Ethernet port, but traffic flow is inhibited. For
example, a lack of circuit setup, an error on the line, or a disabled port
might inhibit traffic flow.
A link exists to the Ethernet port, but no traffic is carried on the port.
A link exists to the Ethernet port, and traffic is carried on the port. The
LED flash rate reflects the traffic rate for that port.
lists Cisco ONS 15454 Ethernet cards with their compatible GBICs and SFPs.
5.13 5.12.2 CE-1000-4 Port-Level Indicators
Table 5-24
describes the status that each color
Table
5-25.
Cisco ONS 15454 Reference Manual, R7.0.1
5-31
Advertisement
Table of Contents
