Ds3/Ec1-48 Faceplate And Block Diagram - Cisco ONS 15454 Reference Manual

Hide thumbs Also See for ONS 15454:

Table of Contents

Electrical Cards

3.6 3.6.2 DS3/EC1-48 Faceplate and Block Diagram

Do not install a DS3/EC1-48 card in Slots 1 or 2 if you have installed an MXP_2.5G_10G card in Slot 3.

Likewise, do not install a DS3/EC1-48 card in Slots 16 or 17 if you have installed an MXP_2.5G_10G

card in Slot 15. If you do, the cards will interact and cause DS-3 bit errors.

With the proper backplane EIA, the card supports BNC or SCSI (UBIC) connectors. See the

"7.2 Electrical Card Protection and the Backplane" section on page 7-5

for more information about

electrical card slot protection and restrictions.

3.6.2 DS3/EC1-48 Faceplate and Block Diagram

shows the DS3/EC1-48 faceplate and a block diagram of the card.

Cisco ONS 15454 Reference Manual, R7.0.1