Mitsubishi Electric MR-J4 Instruction Manual page 51

1. FUNCTIONS AND CONFIGURATION
(b) MR-J4-350A4(-RJ)
The broken line area is the same as
MR-J4-200A4(-RJ) or less.
(1)
(7)
(3)
(2)
Side
(4)
(5)
(6)
No. Name/Application
Main circuit power supply connector (CNP1)
(1)
Connect the input power supply.
(2) Rating plate
Control circuit power supply connector (CNP2)
(3) Connect the control circuit power supply and
regenerative option.
Servo motor power output connector (CNP3)
(4)
Connect the servo motor.
Charge lamp
(5)
When the main circuit is charged, this will light.
While this lamp is lit, do not reconnect the cables.
Protective earth (PE) terminal
(6)
Grounding terminal
Battery holder
(7)
Install the battery for absolute position data
backup.
1 - 32
Detailed
explanation
Section 3.1
Section 3.3
Section 1.6
Section 3.1
Section 3.3
Section 3.1
Section 3.3
Section 12.2