Mitsubishi Electric MR-J4 Instruction Manual page 450

11. OPTIONS AND AUXILIARY EQUIPMENT
(b) 400 V class
Use wires (5)) of the following sizes with the power regeneration converter (FR-RC-H).
(c) 100 V class
Table 11.2 Wire size selection example (HIV wire)
Servo amplifier
1) L1/L2/L3/
MR-J4-60A4(-RJ)
MR-J4-100A4(-RJ)
2 (AWG 14)
MR-J4-200A4(-RJ)
MR-J4-350A4(-RJ)
MR-J4-500A4(-RJ)
2 (AWG 14): b
(Note 2)
MR-J4-700A4(-RJ)
3.5 (AWG 12): a
(Note 2)
MR-J4-11KA4(-RJ)
5.5 (AWG 10): d
(Note 2)
MR-J4-15KA4(-RJ)
8 (AWG 8): g
(Note 2)
MR-J4-22KA4(-RJ)
14 (AWG 6): i
(Note 2)
Note 1. Alphabets in the table indicate crimping tools. For crimp terminals and applicable tools, refer to (2)
in this section.
2. To connect these models to a terminal block, be sure to use the screws that come with the
terminal block.
3. The wire size shows applicable size of the servo amplifier connector and terminal block. For wires
connecting to the servo motor, refer to each servo amplifier instruction manual.
4. Be sure to use the size of 2 mm
5. This is for connecting to the linear servo motor with natural cooling method.
6. This is for connecting to the linear servo motor with liquid cooling method.
Model
FR-RC-H15K
FR-RC-H30K
FR-RC-H55K
Table 11.3 Wire size selection example (HIV wire)
Servo amplifier
MR-J4-10A1(-RJ)
MR-J4-20A1(-RJ) 2 (AWG 14)
MR-J4-40A1(-RJ)
Note 1. The wire size shows applicable size of the servo amplifier connector and terminal block. For wires
connecting to the servo motor, refer to each servo amplifier instruction manual.
2. Be sure to use the size of 2 mm
Wires [mm
2) L11/L21
1.25 to 2
(AWG 16 to 14)
(Note 4)
1.25 (AWG 16): a
2 (AWG 14): c
(Note 4)
1.25 (AWG 16): b
2 (AWG 14): b
(Note 4)
2
when corresponding to IEC/EN/UL/CSA standard.
2
Wire [mm ]
14 (AWG6)
1) L1/L2/ 2) L11/L21
1.25 to 2
(AWG 16 to 14)
(Note 2)
2
when corresponding to IEC/EN/UL/CSA standard.
11 - 79
2
] (Note 1)
3) P+/C
2 (AWG14) AWG 16 to 14
3.5 (AWG 12): a
2 (AWG14): b
5.5 (AWG 10): a
2 (AWG14): f
8 (AWG 8): g
3.5 (AWG 12): d
5.5 (AWG 10): e
(Note 5)
3.5 (AWG 12): e
8 (AWG 8):h
(Note 6)
14 (AWG 6): i
2
Wires [mm ]
3) P+/C
AWG 18 to 14
2 (AWG 14)
(Note 2)
4) U/V/W/
(Note 3)
4) U/V/W/
(Note 1)