3. Periodical check
3.5.8
Replacing the PC drum
A. Periodically replaced parts/cycle
• PC drum: Every 40,000 prints
B. Procedure
1. Remove the developing assy from the imaging unit.
See IU disassemble procedure 1 to 4.
See P.20
[2]
[1]
22
[1]
A09AF2C539DA
A09AF2C540DA
[1]
A09AF2C541DA
Field Service Ver. 1.0 Apr. 2007
5. Unplug the connector [1] of the main
erase.
2. Remove two screws [1], and remove
the pivot shaft [2].
3. Remove the PC drum [1].
NOTE
• Protect the PC drum that has been
removed with a protective cloth.
• If the PC drum has been replaced
with a new one, apply a coat of
toner to the surface of the new PC
drum.
See P.85