Replacing The Separation Roller - Konica Minolta BIZHUB 163 Service Manual

2. Periodical check
[2]
[5]
[4]
[2]
[3]
[1]
[4]
[2]
[3]
[5]
12. To reinstall, reverse the order of removal.
2.1.2

Replacing the separation roller

A. Periodically replaced parts/cycle
• Separation roller: Every 200,000 prints
[1]
[1]
6
4. Remove two levers [1].
[5]
5. Remove five C-rings [2].
6. Remove the arm [3].
7. Remove the belt [4].
8. Remove two pick-up rollers [5].
[1]
4344F2C503DA
9. Remove the C-ring [1], and remove
10. Remove two pins [4].
11. Remove the feed roller [5].
NOTE
• Use care not to lose the pin.
4344F2C504DA
1. Open the upper door [1].
4344F2C500DA
2. Hold the [1] sections in the figure,
[1]
[2]
4344F2C505DA
Field Service Ver. 1.0 Apr. 2007
the gear [2] and the bushing [3].
and remove the cover [2].