Power Unit Cooling Fan Motor (Fm2) - Konica Minolta BIZHUB 163 Service Manual

Field Service Ver. 1.0 Apr. 2007
[1] [3]
[1]
6.3.32

Power unit cooling fan motor (FM2)

1. Remove the left cover, rear cover, and upper rear cover.
See P.45, P.47, P.46
2. Remove the printer control board.
See P.48
3. Remove the MFP board.
See P.49
[1]
[2]
A09AF2C039DA
[2] [1]
[1]
[1]
[1]
A09AF2C590DA
[2]
[3]
[1]
A09AF2C591DA
3. Remove four screws [1], unplug the
connector [2], and remove the main
motor [3].
4. Remove nine screws [1], and remove
the protective cover [2].
5. Remove two screws [1], unplug the
connector [2], and remove the power
unit cooling fan motor [3].
6. Other
77