Misfeed At Paper Take-Up Section - Konica Minolta BIZHUB 163 Service Manual

8. Jam display
8.2.2

Misfeed at paper take-up section

A. Detection timing
Type
Detection of misfeed at
paper take-up section
Detection of paper left in
paper take-up section
B. Action
Paper feed motor (M1-ADF)
Separator sensor (PC6-ADF)
Registration sensor (PC9-ADF)
Original detection sensor (PC8-ADF)
Step
1 Initial check items
2 PC6-ADF I/O check
3 PC9-ADF I/O check
4 PC8-ADF I/O check
5 M1-ADF operation check
6 Change PBA-CONT
32
The separator sensor (PC6-ADF) is not blocked even after the set period of
time has elapsed after the paper feed motor (M1-ADF) is energized.
The registration sensor (PC9-ADF) is not blocked even after the set period
of time has elapsed after the paper feed motor (M1-ADF) is energized.
The separator sensor (PC6-ADF) is not blocked even after the set period of
time has elapsed after the original detection sensor (PC8-ADF) is blocked
by the paper.
The registration sensor (PC9-ADF) is not blocked even after the set period
of time has elapsed after the original detection sensor (PC8-ADF) is
blocked by the paper.
Relevant electrical parts
Action
PBA-CONT CN5CONT-11
PBA-CONT CN7CONT-3 to 6
Field Service Ver. 1.0 Apr. 2007
Description
Main control board (PBA-CONT)
WIRING DIAGRAM
Control signal
-
PBA-CONT CN6CONT-3
PBA-CONT CN6CONT-6
-
Location
(Electrical component)
-
DF-605 G-5
DF-605 G-3
DF-605 G-3
DF-605 C-6
-