Konica Minolta BIZHUB 163 Service Manual page 261

2. Firmware upgrade
(3) For Windows Me/98SE
1. Prepare the files necessary for upgrading the firmware, and copy them to PC.
2. Start the host computer.
3. Turn on the power switch of the machine.
4. Use a USB cable to connect the machine to host computer.
The "Add New Hardware Wizard" dialog box will appear.
5. With Windows Me, choose "Specify the location of the driver (Advanced)", and then
click [Next].
With Windows 98, click [Next]. Then, in the dialog box that will then appear, choose
"Search for the best driver for your device (recommended)", and then click [Next].
6. Choose "Specify a location", and then click [Browse].
7. Specify "\(name of any given language)\Win9X" in the folder in which the TWAIN driver
is stored, and then click [OK].
8. Click [Next]. Then, continue following the instructions in the dialog boxes that will
appear until the "Finish" button appears.
9. Click [Finish].
10. The "Add New Hardware Wizard" dialog box will appear again: Repeat steps 4~8 to
install all drivers.
4
Field Service Ver. 1.0 Apr. 2007