Konica Minolta BIZHUB 163 Service Manual page 172

Field Service Ver. 1.0 Apr. 2007
F. NIC F/W VER.
• This function is available only when the optional NC-503 is installed.
Functions
• To display the NIC firmware version information.
Use
G. ADF F/W VER.
• This function is available only when the optional DF-605 is installed.
Functions
• To display the ADF firmware version information.
Use
H. MAIN RAM SIZE
Functions
• To display the main memory size.
Use
I. SERIAL NO.
Functions
• To display the serial number of the machine.
Use
J. CUSTOMER ID
Functions
• To display the customer ID of the machine.
Use
10.3.5 FUNCTION
A. PAPER FEED TEST
Functions • To check for correct paper passage of the paper take-up and transport system by let-
ting the machine consecutively take up and feed paper without involving actual print-
ing action.
• Here are the details of operation involved in the paper passage motion.
The scanner does not make any scan motion.
Paper is fed until the corresponding paper source runs out of paper.
This test cannot be run with the manual bypass or multiple bypass (option).
No counters are activated.
Use • Used when a paper misfeed occurs
Setting/ <Step>
Procedure 1. Select the paper source.
2. Press the OK key to start the paper feed test.
3. Press the Stop key to stop the paper feed test.
TRAY1
10. Service Mode
TRAY2
137