10. Service Mode; 10.1 Service Mode Function Setting Procedure; Procedure; Exiting - Konica Minolta BIZHUB 163 Service Manual

Field Service Ver. 1.0 Apr. 2007

10. Service Mode

10.1 Service Mode function setting procedure

NOTE
• Care must be used to ensure that only the personnel who are involved in service
jobs know the procedure to enter the Service Mode.
10.1.1

Procedure

1. Press the Utility key.
2. Press the following keys in this order.
Stop → 0 → 0 → Stop → 0 → 1
3. The Service Mode menu screen will appear.
10.1.2

Exiting

• Press the Panel Reset key as many times as it is required to display the initial screen.
10.1.3

Changing the setting value in Service Mode functions

1. Select the desired item using [ ▲ / ▼ /
2. Select the setting value using [ ▲ / ▼ /
3. Validate the selection by pressing the OK key.
4. To go back to previous screen, press the Back key.
/ ] key.
/ ] key, or the 10-key pad.
10. Service Mode
113