Counter - Konica Minolta BIZHUB 163 Service Manual

10. Service Mode
K. ADF REG. LOOP1
See P.26 of the DF-605/MK-501 service manual
L. ADF REG. LOOP2
See P.27 of the DF-605/MK-501 service manual
M. ATDC GAIN
Functions • To manually adjust the ATDC sensor voltage.
Use • To change the original size detection performance settings.
Setting/
Procedure
• The adjusted value of the ATDC auto adjust is the setting value.
N. MODEL SETTING
Functions NOTE
• Never change this setting.
Use
• If it is changed, the Tech. Rep. call (C03FF) will appear.
Setting/ • Default setting depend on the marketing area setting.
Procedure
10.3.3

COUNTER

A. TOTAL COUNTER
Functions • To display the total count value of the selected mode.
Use • To check total count value in each mode.
• Counting method is different depending on the settings of [SECURITY] → [TOTAL
COUNTER COUNT] in the service mode.
See P.144
Setting/ COPY
Procedure COPY DUPLEX : Total count value of duplex copies
PRINT
PRINT DUPLEX: Total count value of duplex prints
B. SIZE COUNTER
Functions • To display the count of the size counter.
Use • Paper sizes on which counting can be made are different depending on the setting of
[SECURITY] → [SIZE COUNTER] in the service mode.
Setting/
• To clear the count, use [CLEAR DATA] of the Service Mode.
Procedure
132
123 (5.39 V) to 186 (8.15 V)
20 ppm 18 ppm
: Total count value in copy mode
: Total count value in PC print mode
Field Service Ver. 1.0 Apr. 2007
16 ppm