Adf Leading Edge Skew Adjustment - Konica Minolta BIZHUB 163 Service Manual

6. Mechanical adjustment
6.2

ADF Leading Edge Skew Adjustment

NOTE
• This adjustment is to be made when a tilted image occurs.
[1]
24
1. Load the test chart [1] in the ADF
[1]
NOTE
• Load the test chart lengthwise.
4688F3C504DA
2. Align each copy sample as shown on
4688F3C505DA
3. Loosen the screw [1].
4688F3C506DA
Field Service Ver. 1.0 Apr. 2007
and make five 1-sided copies.
the left and check the deviation.
If the deviation falls outside the
range specified below, perform the
following steps to make an adjust-
ment.
Specifications: 0 ± 3.0 mm