Replacing A Drum Unit - Konica Minolta bizhub C284 Quick Assist Manual

24
24.3

Replacing a Drum Unit

24.3.1 bizhub C554/C454
1
1
Tips
- Your service representative can recover your used Drum Unit. Put it in a black plastic bag and store it
in a box by itself.
- A Drum Unit may be damaged due to exposure to light. Do not take a Drum Unit out of a black plastic
bag until just before it is to be installed.
- If the replacement time of a Drum Unit other than for black is reached, printing can be continued for-
cibly using black. Tap [Continue], and then select a desired print job.
- After replacing a Drum Unit, be sure to clean the Print Head Glass for each color. For details on how
to clean the Print Head Glass, refer to page 14-3.
7 CAUTION
Handling toner and Drum Unit
- Do not throw a Drum Unit into a fire. Doing so may cause hot toner to spray in all directions, which may
cause burn injuries.
- Be careful not to get the inside of the machine, your clothes, or hands dirty with toner.
- If any toner gets on your hands, wash it off using water or neutral detergent.
- If any toner gets into your eyes, immediately wash it out with water and consult your doctor.
24-10
2
2
1 8
2 7
1
3 6
4 5
3 4
bizhub C554/C454/C364/C284/C224
Replacing a Drum Unit 24.3
2