Service Mode; Service Mode Function Setting Procedure; Procedure; Exiting - Konica Minolta BIZHUB 163 Service Manual

6. Service Mode

6. Service Mode
6.1

Service mode function setting procedure

NOTE
• Care must be used to ensure that only the personnel who are involved in service
jobs know the procedure to enter the service mode.
6.1.1

Procedure

1. Press the Utility key.
2. Press the following keys in this order.
3. Stop → 0 → 0 → Stop → 0 → 1
4. The service mode menu screen will appear.
6.1.2

Exiting

• Press the Reset key.
6.1.3

Changing the setting value in service mode functions

1. Select the desired item using ▲ / ▼ key.
2. Select the setting value using [▲ / ▼ /
3. Validate the selection by pressing the OK key.
4. To go back to previous screen, press the Back key.
6.2

Service Mode function tree

NOTE
• This setting menu contains only the cases in which the DF-605 is mounted.
ADJUST
FUNCTION
CLEAR DATA
22
/ ] key or the 10-key pad.
Service Mode
ADF SUB ZOOM
ADF MAIN REGIST
ADF SUB REGIST 1
ADF SUB REGIST 2
ADF REG. LOOP 1
ADF REG. LOOP 2
ADF FEED TEST
COPY ADF GLASS
ADF WIDTH Ad. (Max)
ADF WIDTH Ad. (Min)
ADF SENSOR ADJUST
ADF BACKUP CLEAR
Field Service Ver. 1.0 Apr. 2007
Ref. page
P.23
P.24
P.25
P.26
P.26
P.27
P.27
P.27
P.27
P.28
P.28
P.28