Konica Minolta BIZHUB 163 Service Manual page 135

8. Utility Mode
D. DENSITY (ADF)
• This setting is available when the optional DF-502 or DF-605 is mounted.
Functions • To set the reading image density level when the automatic document feeder is used.
MODE1 : To lower the image density to prevent a dirty copy from being pro-
Use
MODE2 : To produce a copy having an image density equivalent to that of the
Setting/ • The default setting is MODE1.
Procedure
NOTE
• The low image density is set as the default value to prevent a dirty copy from
being produced.
E. DENSITY (BOOK)
Functions • To set the reading image density level when the original glass is used.
MODE1 : To produce a copy having an image density equivalent to that of the
Use
MODE2 : To lower the image density to prevent a dirty copy from being pro-
Setting/ • The default setting is MODE1.
Procedure
F. PRINT DENSITY
Functions
• To set the print density in 5 scales.
Use
Setting/ • The default setting is displayed with
Procedure
G. LCD CONTRAST
Functions
• To set the LCD display contrast in 4 scales.
Use
Setting/ • The default setting is displayed with
Procedure
100
duced.
original.
"MODE1"
original.
duced.
"MODE1"
.
LIGHT
.
LIGHT
Field Service Ver. 1.0 Apr. 2007
MODE2
MODE2
DARK
DARK